Wired fire alarm for office safety with smoke detection sensorWired Smoke Alarm DC12V/24V Networking smoking Detector Switch Fire alarms detectors Sensor<br> Features<br> This product is a non-coded smoke detector with a pair of switch output contacts, which can be normally open or normally closed according to actual needs. During normal operation, the indicator light flashes once every 8 seconds: when an alarm occurs, the indicator light is always on, and the alarm output contact operates at the same time.<br> Power-off reset/automatic reset optional<br> Common reporting output NC/NO optional<br> 9/35V non-polar wide voltage input (AC, DC)<br> Network output/LED indication alarm/Buzzer sounding alarm<br> SMT process manufacturing, strong stability<br> Low quiescent current to save power<br> Dust-proof, insect-proof. Anti-white light interference design<br> Metal shield, anti-RF interference (20V/m IGiiz)<br> Technical Parameters<br> Standby current: 16mA (relay normally closed), 3mA (relay normally open)<br> Alarm current: 8mA (relay normally closed), 19mA (relay normally open)<br> Alarm indication: red LED is always on<br> Sensor: Infrared photoelectric sensor<br> Working temperature: -10 C~+50 C<br> Ambient temperature: maximum 95%RH (no condensation)<br> Anti RF interference: 10MHz1GHz 20V/m<br> Alarm output: normally open/normally closed optional, contact capacity DC28V100mA<br> Reset mode: automatic reset/power-off reset optional<br> Coverage area: when the space height is 6m-12m, the protection area of one detector is 80 square meters for general protection sites: when the space height is below 6m, the protection area is 60 square meters. The specific parameters should be subject to the design specification GB50116-98 of automatic fire alarm system.<br> Execution standard: GB47162005, EN547<br> Sensitivity: 0. 5db/m (0. ldb/m)