Description: <p>The VL53L0X is a time-of-flight ranging system integrated into a compact module.</p><p>The sensor can report distances up to 2 m (6.6 ft) at 1 mm resolution,but its effective range and accuracy (noise) depend to a large extent on environmental and target characteristics.</p><p>Measurement measurements can be made via the sensor's I2C (TWI) interface,which is also used to configure the sensor settings.The sensor provides two additional pins:the shutdown input and the interrupt output.</p><p>VDD - Regulated 2.8 V output.Almost 150 mA is available to power external components.</p><p>VIN - The main 2.6 V to 5.5 V power supply connection.The SCL and SDA level shifters pull the I2C lines high to this level.</p> Specification: <p>Material:Plastic + Electronic Components</p><p>Color:Purple,Black</p><p>Size:25x10mm/0.98x0.39inch</p><p> </p><p>GND -The ground (0V) connection for your power supply.Your I2C control source must also share a common ground with this board.</p><p>SDA Level-shifted I2C data line:HIGH is VIN,LOW is 0 V.</p><p>SCL Level-shifted I2C clock line:HIGH is VIN,LOW is 0 V.</p><p>XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default.Driving this pin low puts the sensor into hardware standby.This input is not level-shifted.</p> Size_Chart: Note: <p>Color maybe slightly different due to different monitor.</p><p>The above size is measured by hand,please allow slightly difference.Thanks !</p> Package_Includes: <p>1x Range Sensor Module Set</p><p>1x Pin Header</p>