Application range: can be applied to the surface of the materails such as hardware(,iron,aluminum,copper,etc.),wood,plastic(ABS,PU,PP,PE,PVC,etc.),stone,ceramic,glass,etc. Applicable industries: autos, electronic products,household appliance,daily arts and crafts,indoor,footwear,sports apparatus,etc. Tensile properties, pattern is not easy deformation. Environment , it will not bring pollution to the natural environment. Not easy to fade; waterproof ; enduring aesthetic appearance. Water transfer film , also called cubic transfer printing, is a way to do the printing on the surface is irregular, which overcomes the problem facing offset printing can not reach the tongued and grooved face. Water Operation Temperature: 25-35Celsius Thickness: 0.03mm Size: 0.5*2m Color:green Material:PVA Pattern:Skull How To : 1. coating: Mix the paint obtaining the color you need. 2.Film selections: Select printing film you need. 3.Place film: Cut out the fit size, place it flatly on water surface. 4.Activation: Spray the activator uniformly on the film after placing the film on the water 60-90 seconds. 5.Transfer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure. 6.Soaking: About . 7.Washing: Remove the remaining film. 8.Drying: Remove the product' surface water. : The film should be covered by plastic when store. A heavy / dark trash bag is perfect. Film : 18-25Celsius Optimum Temperature: 21.5Celsius Humidity: 45-65% Do not open until to to prevent contact with the . Water Transfer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment Do not store near water or in the room where your dip tank is located. Avoid direct sunlight. Package Contents: 1 x Water Transfer Printing Film Note: Light and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.