1. Specifications: 2. Battery Type: 1x 9V battery (Not Included) 3. Item Weight: 0.3kg 4. Hardware Version: -T5 5. Software Version: EL-50448 6. Material Type: ABS 7. Color: Black + Orange 8. How to use EL 50448 TPMS Activation Tool: 9. Step 1: 10. Enter learning mode 11. Set the gearshift lever to "P" 12. Put the ignition switch to ON 13. Enter the interface of tire pressure display by DIC 14. DIC shows "Press Set / Ctrl to re-learn" 15. Press Set / Ctrl 16. The turn signal light is on for 3 seconds and the horn beeps twice to enter the learning mode 17. Step 2: 18. Read tire pressure sensor information 19. Start from the front-left wheel, 20. Place the EL-50448 Tool antenna up against the valve core, close to the rim and tire sidewall 21. Press the Start Button 22. The tire pressure sensor information is successfully read when the horn once 23. Step 3: 24. Same to read other tire pressure information 25. Follow the instruction above to read tire pressure of the front-right, rear-right, rear-left wheels. 26. Turn signal lights turn on for 3 seconds and the horn twice when the learning is complete. 27. Tire Pressure Monitor Sensor TPMS Activation Tool EL-50448 -T5 28. For vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448. 29. Packaging includes 30. 1x EL-50448 Tire Pressure Reset Instrument 31. Only the above package content, other products are not included. 32. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.