Feature: 1. Hot air gun has closed loop sensor, high power, provide rapid heating and accurare temperature. 2. Hot air gun adopts eddy current brushless fan with large air volume and strong air output, convenient to adjust temperature. 3. Hot air gun is equipped with an induction switch, can quickly enter the working mode when holding the handle and enter the standby state when puting the handle back. 4. Hot air gun has an automatic cold air function, can extend the life of the heating stuff and protect the hot air, and with USB5V output and DC9V jack. 5. Hot air gun adopts eddy current brushless fan and high temperature resistant ceramic and alloy wire, have a long service time with low noise and large air flow. 6. The soldering iron is lightweight and will not feel tired even after long‑time use. 7. The soldering iron has the function of dismantling and dissipating static electricity, can better protect the components and is safe and reliable. 8. The soldering iron frame and soldering station adopt a split design save working space in particular, easy to place. Specification: Item Type: Hot Air Rework Station Shell Material: Aluminum alloy Fan Power Consumption: 700W Soldering Iron Power Consumption: 60W Temperature Adjustment Range: 100 degrees celsius-450 degrees celsius Display Form: Digital instructions Noise: Less than 45dB Working Environment: 0-40℃ relative temperature <80% Air Flow: 120L/min (maximum) Storage Temperature: -20-80℃ relative temperature <80% Purpose: Suitable for the desoldering of various components such as SOIC, CHIP, PLCC, QFP, BGA, etc. (especially suitable for the desoldering of mobile phone cables and cable holders). Used for heat shrinkage, drying, paint removal, debonding, thawing, preheating, disinfection, welding, etc.. Package List: 1 x Hot Air Gun1 x Soldering Iron Stand1 x Cleaning Sponge1 x DC9V Jack Line3 x Air Gun Mouth1 x Air Pressure Gun Holder1 x Electric Soldering Iron1 x User Manual Note: Precautions for product use:1. The air outlet of the hot air desoldering station and its surroundings may have extremely high temperatures, so be careful to prevent burns.2. The heating handle must be placed on the handle frame, never on the work surface or other places.3. Please keep the air outlet unobstructed, and there should be no obstructions.4. After the work is completed, the heating handle must be placed on the handle frame, and the machine can be automatically cooled to below 100 degrees Celsius (into the standby state) before the power switch can be turned off.5. The distance between the air outlet and the object during use is at least 2 mm, calculated as the air outlet.5. Please pull out the plug if you will not use it for a long time after work.7. Please do not let children approach or touch.