100% New and high quality.Small body and stable performance.This module is programmable and can perform thousands of functions.The operation is stable and reliable.The built-in synchronization circuit can effectively the long-term operation of the module.Function:1. Turn on the power, relay 1 is closed after N seconds of closure; then relay 2 is closed after N seconds of closure.2. Turn on the power, relay 1 is turned off after N seconds of closing; then relay 2 is off after N seconds, and then cycles.3. When the power is turned on, relays 1 and 2 are not activated. When there is a signal or the button is triggering, relay 1 is turned off after N seconds is closed; then relay 2 turns off after N seconds, and then turns off until trigger, repeating the same action.By programming signals 1,2, any control of relays 1 and 2 can be performed.4. When signal 1 has a signal, relay 1 is closed and relay 2 is off; 5. When signal 2 has a signal, relay 1 is off and relay 2 is closed.6. Only the NPN signal sensor can be connected, and the sensor signal can be programmed to carry out any relay monitoring.7. When signal 1 has a trigger, control relay 1; When signal 2 has a trigger, control relay 2.8. Turn on the power, control the engine to turn for N seconds, then turn N seconds, and cycle.9. When signal 1 has a signal, the motor is controlled to turn forward; When signal 2 has a signal, the motor turns.Condition 100% NewModel: FX1N-14MTPower Supply: 10-28VDCMaximum memory: 8000 stepsColour: BlackMaterial: PlasticPackage Contents:1 * Industrial Control Board1 * housingOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.