Leírás
Gypsum plaster ST10 start 5 kg
Gypsum Plaster ST10 start 5 kg
Snow-white loose plaster with excellent adhesion to substrates. It does not shrink, dries quickly, does not crack even in thick layers, and is easy to sand. After applying the plaster, walls and ceilings obtain a perfectly smooth, easy to paint surface.
The mixed plaster can be applied "wet on wet," i.e. the next layer is applied before the previous one is fully dry, which significantly shortens the working time. After applying the putty, walls and ceilings achieve a perfectly smooth, snow-white, easy-to-paint surface.
Product advantages and features
Quick and easy application.
Perfect surface - free of bubbles and craters.
Contains microfillers , thanks to which the putty very precisely fills scratches and cracks, and creates a perfectly smooth surface, ready for painting.
Dries quickly.
Increased strength and flexibility.
Fibers prevent cracking and make the structure of the filler more flexible.
Work comfort – easy sanding.
Clean processing – limited dusting.
Important information
The substrate to be filled should be firmly bound, dry, free of grease, loose plaster grains, free of dust and dirt
Pour the intended amount of dry filler into a container with water in the amount of approximately 1 kg of dry filler per 0.4 l of water, stirring constantly
"Wet on wet" application - applying another layer while maintaining the following conditions: 1 layer with a thickness of 23 mm; application time - before the 1st layer is fully dry (approx. 75% of the surface is dry to the touch)
Smooth the dried surfaces with sandpaper, a sanding sponge or Remove dust and prime with a 100/150 grit mesh
Priming should be performed using a paint roller or by spraying. Using a brush may cause blurring and create unevenness on the surface.
During use, wear protective gloves/protective clothing/eye protection/face protection
Parameters:
Manufacturer: Śnieżka
Weight: 5 kg
Application method: Metal spatula
Efficiency: Depends on the layer thickness, approx. 1.5 kg/m² with a layer thickness of 1 mm
Application: For finishing and renovation works inside rooms, smoothing walls
The price is for one piece
-
Fruugo azonosító:
445456241-935526042
-
EAN:
5903973104414
Kiszállítás és visszaküldés
Kiküldés -1 napon belül
Szállítás innen: Lengyelország.
Minden tőlünk telhetőt megteszünk annak biztosítására, hogy rendelését hiánytalanul és előírásainknak megfelelően szállítás ki önnek. Viszont ha egy hiányos rendelést kap, vagy eltér a megrendelttől, vagy bármilyen más okból nem elégedett a rendeléssel, akkor visszaküldheti a rendelést vagy a rendelésben lévő bármely terméket, és visszatérítik a termék árának teljes összegét. Teljes visszaküldési irányelvek megtekintése.