1. Complies with J1772 standard 2. Sleek design with protective cover, supports front installation 3. Pin head features safety insulation to prevent accidental contact; protection level reaches IP54 4. Type: European to American adapter 5. Use: Charging Mechanical performance: 1. Mechanical life: 10,000 cycles of no-load plugging and unplugging 2. Insertion force during coupling: Less than 80N (minimum 45N) Electrical performance: 1. Rated working current: 16A or 32A 2. Working voltage: 110V250V 3. Insulation resistance: 1000M (DC500V) 4. Terminal temperature rise: Less than 50K 5. Withstand voltage: 2000V 6. Contact resistance: Maximum 0.5m Temperature: 1. Working environment temperature: -30C to +50C We recommend following these steps: 1. Plug the Type 2 end of the adapter into the charging cable 2. Plug the Type 1 end of the adapter into the vehicles charging socket 3. Once the adapter clicks into place, charging can begin Remember to activate the charging station When charging is complete, disconnect the vehicle side first, then the charging station side. Remove the adapter from the charging station when not in use. Material: Thermoplastic Color: Black Package Contents: 1 x Electric Vehicle Charging Adapter Note: The package includes only the items listed above. Other accessories are not included. Lighting and display settings may cause slight variations in color between the image and the actual product. Measurement error allowance: +/- 13 cm.