1Wide Applications: Turbine worm gear motor is suitable for smart home appliances, robots and industrial automation, etc. 2Zinc Alloy Shell: With zinc alloy die casting shell, it is not easy to rust and corrode, and has good wear resistance. 3Carbon Brush Structure: Using carbon brush structure, has low friction, low power consumption and low temperature rise, prolonging the service life. 4With Output Shaft: The geared motor has an 8mm stainless steel output shaft, which runs smoothly and quietly. 5High Performance: The motor supports speed regulation and CW and CCW, and has self locking function, which makes the operation more flexible. Item Type: Gear Motor Model: JGY-370 Material: Carbon, zinc alloy Purpose: Drive device Adjustable Speed: Support CW and CCW: Support Operating Voltage: DC 12V Output Shaft Size: Approx. 8mm or 0.3in output shaft, M5 threaded rod double flat position Reduction Ratio (Change Ratio)4065901502002603406001000 No Load Current MA606060606060606060 No Load Speed RPM150906640302318106 Rated Torsion Kg.cm0.20.50.725.36.7915.926.5 Rated Speed RPM1207051302218157.54 Rated Current A0.60.60.60.60.60.60.60.60.6 Maximum Torsion Kg.cm0.91.627.51013183045 Stop Current A1.71.71.71.71.71.71.71.71.7 1 x Gear Motor 1. Make sure that the voltage of the motor is correct before use. If it is a DC motor, confirm whether the power supply current is sufficient. 2. It cannot be used with overload. The reason for overload is mainly divided into two parts: torsion and shaft force. The load torsion cannot exceed the rated torsion of the motor. The shaft force cannot exceed the axial and radial allowable force of the shaft. After the load is loaded, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor. 3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the effect of the motor.