CO2 and Argon Refill Adapter with 1.5M Hose for Small Welding Tanks, 250 Bar Connection Kit

12 690,00 Ft
+ 4 999,00 Ft szállítási költség

CO2 and Argon Refill Adapter with 1.5M Hose for Small Welding Tanks, 250 Bar Connection Kit

  • Márka: Unbranded
Értékesítő:

CO2 and Argon Refill Adapter with 1.5M Hose for Small Welding Tanks, 250 Bar Connection Kit

  • Márka: Unbranded
Javasolt fogyasztói ár: 27 790,00 Ft
Ár: 12 690,00 Ft
Megtakarítás: 15 100,00 Ft (54%)
Értékesítő:
12 690,00 Ft
+ 4 999,00 Ft szállítási költség

Készleten

A következő fizetési módokat fogadjuk el

Leírás

Please check your tank thread before making an order. OD: 22mm W21.8-14 / DIN477 / M22-14 for your CO2 tank. Commonly used in Russia, Korea, Japan, UK, France, Switzerland, Sweden, Ukraine, Germany, South Africa, Czech Republic, Singapore, etc. This item is used to refill small Argon/CO2 tanks from larger CO2 cylinders, allowing convenient refilling of small tanks. CO2 Refilling Station Charging Adapter Type: W21.8-14 How it works: 1. Cool the cylinder in the freezer for 1 hour. 2. Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder. 3. Disconnect the quick connector of the black adapter, then tighten the black adapter to the cylinder (must turn the knob on the top of the black adapter to the highest position. The entire process does not require turning the adapter knob down to open the cylinder. If the adjusting rod presses down the 6mm wide valve pin, this will close the valve and prevent CO2 from entering). 4. Connect the quick connector. 5. For most large cylinders: upright or lay the cylinder horizontally (some host tanks do not have a dip/syphon tube inside). 6. Carefully open the valve of the gas bottle (the valve on the cylinder closes the flow if opened too much. This occurs when the large cylinder is opened too much or too quickly. Open the large cylinder slowly and carefully. You will hear airflow when it is properly engaged). 7. After approximately 15–20 seconds, the cylinder is completely filled. 8. Close the valve of the gas bottle. 9. Open the bleed screw to release residual gas. 10. Unscrew the CO2 adapter — filling is complete. Color: Black Material: Metal Package Contents: 1 x Charging Valve Connector Only the above package content is included; other products are not included. Note: Light reflection and different display settings may cause slight variations in the color of the item in the picture compared to the actual product. Measurement error allowance is +/- 1–3 cm.
  • Fruugo azonosító: 416095065-878135714
  • EAN: 3603522145104

Termékbiztonsági információk

Kérjük, olvassa el a termékre vonatkozó biztonsági információkat az alábbiakban

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Biztonsági figyelmeztetések:
  • When using the product
  • monitor children in real time to ensure safety during use.

Kiszállítás és visszaküldés

Feladott 24 órán belül

  • STANDARD: 4 999,00 Ft - közötti szállítás K 21 október 2025–H 03 november 2025

Szállítás innen: Kína.

Minden tőlünk telhetőt megteszünk annak biztosítására, hogy rendelését hiánytalanul és előírásainknak megfelelően szállítás ki önnek. Viszont ha egy hiányos rendelést kap, vagy eltér a megrendelttől, vagy bármilyen más okból nem elégedett a rendeléssel, akkor visszaküldheti a rendelést vagy a rendelésben lévő bármely terméket, és visszatérítik a termék árának teljes összegét. Teljes visszaküldési irányelvek megtekintése.

Termékmegfelelőségi részletek

Kérjük, tekintse meg a termékre vonatkozó megfelelőségi információkat az alábbiakban.

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Gyártó:
Az alábbiakban olvashatók a Fruugo platformján értékesített releváns termék gyártójának elérhetőségei.

  • Jiang Jiamin
  • Shanghai Zhenyou Technology Co., Ltd.
  • Building 1, No. 5601, Yanqian Road Fengxian District
  • Shanghai
  • CN
  • 201400
  • chengchan41525@163.com
  • 13822016759

Felelős személy az EU-ban:
Az alábbiakban olvashatók az Európai Unióban kijelölt felelős személy elérhetőségei. A felelős személy az az Európai Unióban székhellyel rendelkező gazdasági társaság, amely az Európai Unióban eladott releváns termékekhez kapcsolódó megfelelőségi kötelezettségekért felel.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149