A. Use: Embroidery B. Type: Wooden embroidery hoop - It is lightweight and durable. - Each hoop has a comfortable feel after being sanded. - It is suitable for hand - embroidery (ribbon embroidery, wool embroidery, candlewick embroidery, etc.). C. Usage method: - Step 1: Loosen the outer screw, lay the inner hoop flat, place the fabric on the hoop, and then put the outer hoop over the inner hoop. - Step 2: Smooth out the fabric and tighten the screw. - Step 3: Continue to smooth out the fabric until there are few wrinkles. Make sure that both the warp and weft of the fabric are as vertical as possible, and finally tighten the screw. - Step 4: Check if the hoop is tight enough. The way to check the tightness is to pass a threaded needle through the fabric surface. If there is a "popping" sound when pulling the thread, it can be considered acceptable. D. Dimensions: - The diameter is about 17 cm. - The hoop width is about 3/8 inch. E. Color: Wood color F. Material: Bamboo G. Package contents: - There are 12 embroidery wreathes in the package. - Only the above - mentioned items are included in the package, and other items are not. H. Note: - Light and different displays may cause the color of the item to vary a bit from the actual product. - The measurement error is allowed to be around ±1 - 3 cm.