For Can K-Line Immo Tool V4.06 Support for CAN/K-Line ECU Tool OBD2 Programmer Read Write EEPROM js

127 390,00 Ft
+ 999,00 Ft szállítási költség

For Can K-Line Immo Tool V4.06 Support for CAN/K-Line ECU Tool OBD2 Programmer Read Write EEPROM js

  • Márka: Unbranded
Értékesítő:

For Can K-Line Immo Tool V4.06 Support for CAN/K-Line ECU Tool OBD2 Programmer Read Write EEPROM js

  • Márka: Unbranded
Ár: 127 390,00 Ft
Értékesítő:
127 390,00 Ft
+ 999,00 Ft szállítási költség

Készleten

A következő fizetési módokat fogadjuk el

Leírás

OBDII tool with for car electronic control unit internal memory modification functions, such as Read/Write EEPROM or FLASH, Clear Immobilizer Code, Read Immobilizer Status and Program Cards. There is no need to open control unit, de-solder memory IC or connect any wires directly to it. All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using connection manual . Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared - no programming is required. This in not a tool for a TOTAL immobilizer disabling. It only clears previously memorized immobilizer code to give ability of using second-hand Engine control Unit (ECU) in particular car or make simple data cloning from one ECU to another. : win xp, win 7, win 10 Internet connection: no required External power supply: no required Software V2.86 supports: EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code EDC15C13 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code 31H - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code 35 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code ...... Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly, The Actual Product May Have Slight Differences Or Color Differences the color and appearance may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance. Colour:Photo Color Material:plastic Package Contents: 1 x for Can K-line Immo Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo azonosító: 347358414-758996438
  • EAN: 9463280468044

Termékbiztonsági információk

Kérjük, olvassa el a termékre vonatkozó biztonsági információkat az alábbiakban

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Termékbiztonsági címkék

CE Mark
Biztonsági figyelmeztetések: Please refer to the product manual before use

Kiszállítás és visszaküldés

Feladott 24 órán belül

  • STANDARD: 999,00 Ft - közötti szállítás P 17 október 2025–K 28 október 2025

Szállítás innen: Kína.

Minden tőlünk telhetőt megteszünk annak biztosítására, hogy rendelését hiánytalanul és előírásainknak megfelelően szállítás ki önnek. Viszont ha egy hiányos rendelést kap, vagy eltér a megrendelttől, vagy bármilyen más okból nem elégedett a rendeléssel, akkor visszaküldheti a rendelést vagy a rendelésben lévő bármely terméket, és visszatérítik a termék árának teljes összegét. Teljes visszaküldési irányelvek megtekintése.

Termékmegfelelőségi részletek

Kérjük, tekintse meg a termékre vonatkozó megfelelőségi információkat az alábbiakban.

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Gyártó:
Az alábbiakban olvashatók a Fruugo platformján értékesített releváns termék gyártójának elérhetőségei.

  • Ebeis(HK) co., Limited
  • Ebeis(HK) co., Limited
  • Flat/RM 185G/Fhang Wai lnd Centre
  • No.6 Kin Tai ST, Tuen Mun, NT
  • Hongkong
  • HK
  • 999077
  • ebeishk@hotmail.com

Felelős személy az EU-ban:
Az alábbiakban olvashatók az Európai Unióban kijelölt felelős személy elérhetőségei. A felelős személy az az Európai Unióban székhellyel rendelkező gazdasági társaság, amely az Európai Unióban eladott releváns termékekhez kapcsolódó megfelelőségi kötelezettségekért felel.

  • Yuan Li
  • Sea&Mew Consulting GmbH
  • Mittenhuber Stra?e 4
  • Neumarkt
  • DE
  • 92318
  • Compliance.EU@outlook.com
  • 4915224685061