7pcs Hss Cnc 4 End Mill Milling Cutter Drill Bit Set 1.5 2 2.5 3 4 5 6mm

1 199,00 Ft
+ 2 449,00 Ft szállítási költség

7pcs Hss Cnc 4 End Mill Milling Cutter Drill Bit Set 1.5 2 2.5 3 4 5 6mm

  • Márka: Unbranded
Értékesítő:

7pcs Hss Cnc 4 End Mill Milling Cutter Drill Bit Set 1.5 2 2.5 3 4 5 6mm

  • Márka: Unbranded
Ár: 1 199,00 Ft
Értékesítő:
1 199,00 Ft
+ 2 449,00 Ft szállítási költség

Készleten

A következő fizetési módokat fogadjuk el

Leírás

Use super-hard high-speed steel, durable To optimize the through the center of the design, based on the machined,workpiece more smooth Has a very high wear resistance and strength, exclusively for high-speed cutting of high,hardness cutter versatile applications Capable of 55 degrees of heat directly following a high speed roughing to fine machining, reducing the number of tool changes ahead of the machine utilization rate, save when making process to the cutting surface milling / short side milling based. Material: High-speed steel Flute quantity: 4 color:Silver Size: 1.5mm: Cutting Diameter:1.5mm; Shank Diameter:6mm;Overall Length:51mm; 2mm: Cutting Diameter:2mm; Shank Diameter:6mm;Overall Length:51mm; 2.5mm: Cutting Diameter:2.5mm, Shank Diameter:6mm;Overall Length:52mm; 3mm: Cutting Diameter:3mm; Shank Diameter:6mm;Overall Length:52mm; 4mm: Cutting Diameter:6mm; Shank Diameter:6mm;Overall Length:55mm; 5mm: Cutting Diameter:5mm; Shank Diameter:6mm;Overall Length:57mm; 6mm: Cutting Diameter:6mm; Shank Diameter:8mm;Overall Length:60mm; Suitable For: Carbon steel, tool steel, alloy steel, tool steel, quenched and tempered steel, cast iron, stainless steel, heat-treated steel Note: Before using this tool, please measurement tool deflection, tool deflection accuracy exceeds 0.01MM, please correct before cutting. The shorter the length of the tool projecting chuck of the better, if the amount of the tool extends the projected long, please cut their own speed, feed rate or cutting the amount. When cutting, if the abnormal vibration or sound, cut spindle speed and depth of cut to improve the situation so far. Cooling the steel material to a spray or jet is the to apply, so that high aluminum titanium play the best results. Stainless steel, titanium alloy or heat resistant alloy recommend the use of non-water-soluble cutting fluid. Package Contents: 7 x 4 Flute End Mill Cutter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo azonosító: 324736181-719502777
  • EAN: 9068420187894

Termékbiztonsági információk

Kérjük, olvassa el a termékre vonatkozó biztonsági információkat az alábbiakban

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Termékbiztonsági címkék

CE Mark
Biztonsági figyelmeztetések:
  • Keep Away from Heat: Do not expose to open flames, sparks, or high temperatures
  • Avoid Direct Sunlight: Store in a cool, dry place
  • Handle Carefully: Do not puncture, crush, or disassemble.
  • Follow Storage Guidelines: Adhere to recommended temperature and storage conditions

Kiszállítás és visszaküldés

Feladott 24 órán belül

  • STANDARD: 2 449,00 Ft - közötti szállítás Cs 23 október 2025–Cs 30 október 2025

Szállítás innen: Kína.

Minden tőlünk telhetőt megteszünk annak biztosítására, hogy rendelését hiánytalanul és előírásainknak megfelelően szállítás ki önnek. Viszont ha egy hiányos rendelést kap, vagy eltér a megrendelttől, vagy bármilyen más okból nem elégedett a rendeléssel, akkor visszaküldheti a rendelést vagy a rendelésben lévő bármely terméket, és visszatérítik a termék árának teljes összegét. Teljes visszaküldési irányelvek megtekintése.

Termékmegfelelőségi részletek

Kérjük, tekintse meg a termékre vonatkozó megfelelőségi információkat az alábbiakban.

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Gyártó:
Az alábbiakban olvashatók a Fruugo platformján értékesített releváns termék gyártójának elérhetőségei.

  • Anqing Diancou Shangmao Youxian Gongsi
  • Anqing Diancou Shangmao Youxian Gongsi
  • Room 604, Building 2, Brilliant New Village, Laofeng Town, Economic and Technological Development Zone, Anqing City, Anhui Province
  • anqing
  • CN
  • 246000
  • a526635189@163.com
  • 15976121880
  • https://www.fruugo.co.uk/anqing-iodine-trading/m-22142

Felelős személy az EU-ban:
Az alábbiakban olvashatók az Európai Unióban kijelölt felelős személy elérhetőségei. A felelős személy az az Európai Unióban székhellyel rendelkező gazdasági társaság, amely az Európai Unióban eladott releváns termékekhez kapcsolódó megfelelőségi kötelezettségekért felel.

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69, 60329 Frankfurt am Main
  • Frankfurt am Main
  • DE
  • 60329
  • E-crossStu@web.de
  • 69332967674
  • https://www.dnb.com/business-directory/company-profiles.e-crossstu_gmbh.1c9aad5dc9bd55eb05eb6c8a6249315d.html