3.2" TFT LCD Mega Shield V2.2 Expansion Board For Touch Screen Display YHXWF

5 290,00 Ft
INGYENES kiszállítás

3.2" TFT LCD Mega Shield V2.2 Expansion Board For Touch Screen Display YHXWF

  • Márka: Unbranded
Értékesítő:

3.2" TFT LCD Mega Shield V2.2 Expansion Board For Touch Screen Display YHXWF

  • Márka: Unbranded
Javasolt fogyasztói ár: 10 690,00 Ft
Ár: 5 290,00 Ft
Megtakarítás: 5 400,00 Ft (50%)
Értékesítő:
5 290,00 Ft
INGYENES kiszállítás

Készleten

A következő fizetési módokat fogadjuk el

Leírás

Features The TFT01 LCD works under 3.3V voltage and cannot be used directly on the standard board, so the TFT Shield part is designed, which can be directly inserted into the Arduino board to use the TFT01 LCD module. This LCD TFT01 Mega shield V2.2 is suitable for 3.2 inch TFT LCD module; because the Mega board has enough pins to use SD card and touch function at the same time. The TFT01 LCD 16 can support the current mode because there is enough Mega2560 IO, and only use the touch screen interface or SD card interface, which does not exist in the case of 328S. TFT01LCD supports 8-bit mode, can use SD card interface and touch screen interface at the same time, and adopts IC voltage divider to make TFT display more stable. 3.2" TFT LCD Shield, can be directly connected to the expansion board on 3.2" TFT, compatible with Arduino. Features: -The TFT01 LCD works under 3.3V voltage and cannot be used directly on the standard board, so the TFT Shield part is designed, which can be directly inserted into the Arduino board to use the TFT01 LCD module. -This LCD TFT01 Mega shield V2.2 is suitable for 3.2 inch TFT LCD module; because the Mega board has enough pins to use SD card and touch function at the same time. -The TFT01 LCD 16 can support the current mode because there is enough Mega2560 IO, and only use the touch screen interface or SD card interface, which does not exist in the case of 328S. -TFT01LCD supports 8-bit mode, can use SD card interface and touch screen interface at the same time, and adopts IC voltage divider to make TFT display more stable. -3.2" TFT LCD Shield, can be directly connected to the expansion board on 3.2" TFT, compatible with Arduino. Specifications: Document Download: pan.baidu.com/share/link?shareid=7326&uk=2099480123 1 x TFT Mega Touch LCD Shield Note: This kit requires professional knowledge and ability, please make sure you know how to use it. Package List
  • Fruugo azonosító: 397211928-847502249
  • EAN: 9789622302334

Termékbiztonsági információk

Kérjük, olvassa el a termékre vonatkozó biztonsági információkat az alábbiakban

Az alábbi információkat a terméket értékesítő független, harmadik fél kiskereskedő biztosítja.

Termékbiztonsági címkék

CE Mark
Biztonsági figyelmeztetések: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Hozzávalók: As shown in the figure

Kiszállítás és visszaküldés

Kiküldés 2 napon belül

  • STANDARD: INGYENES - közötti szállítás H 27 október 2025–P 31 október 2025 - INGYENES

Szállítás innen: Kína.

Minden tőlünk telhetőt megteszünk annak biztosítására, hogy rendelését hiánytalanul és előírásainknak megfelelően szállítás ki önnek. Viszont ha egy hiányos rendelést kap, vagy eltér a megrendelttől, vagy bármilyen más okból nem elégedett a rendeléssel, akkor visszaküldheti a rendelést vagy a rendelésben lévő bármely terméket, és visszatérítik a termék árának teljes összegét. Teljes visszaküldési irányelvek megtekintése.