installation method: 1. If you have a furnace that better, Simply remove the back cover of the luminaire and the bulb. Put in the oven and warm 80 paragraph C. Heat paragraph softens 10 minutes and a glue. The lamp is separate from the lamp. 2: If you do not have an oven, you have to use a heat , which heats the sharpest corner of the headlight, warms to it for a while, and After the glue has softened Inserts a screwdriver. (Note: do not use too many forums to avoid damage; when warming up a glove And touch, even a little heat, to stop the heating. Make sure that the temperature is not too high to avoid damage to the Faris) 4: after the long heat, quickly open the corner and do not forget to wear gloves (gloves should be clean and can not be discarded). 5: well and was more efficient, heating up a paragraph, a minute was enough. If it does not go well. Continue one. Heat a separate part with a heat . A glue softens. Quickly separated. 6: after separation, do your best. Clean the glue inside the glue tank. Put on gloves and start installing a lamp. 7: Use glue to apply a glue to the container. 8: Install a lamp cover. A small amount of glue overflows during an installation. It can not be processed in the first place. After the glue Dried. Deal with a blade. For A4 B8 2008-2012 Car Headlight Clear Lens Shell Cover Driver & Passenger Side Auto Shell Headlight lens cover made of Polycarbonate (PC) plastic material, environment-friendly with a protective UV coating which prevents yellowing or fading. Having Elegant appearance, looks very cool and Top quality guaranteed. Introduction: Product Name: Car Headlight lamp Production process: high temperature molding PC hardening Product Material: PC material Applicable models: for A4 b8 2008-2012 1.For A4 b8 2008-2012 2.Made of plastic material, environment-friendly,light weight and . 3. parent shell, does not