About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Infinix Note 11 Pro X6972. Replace old, broken, cracked, damaged3. Make your device look fresher than ever4. Fits and works perfectly5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We are not responsible for any damage after the screen is installedPre-installation precautionsTip 1: Test before installationWhen testing, do not remove any protective film or label. Please pay attention to static electricity issues. Before attempting any repair, always use an ESD (electrostatic discharge) strap to ground yourself. This will prevent static electricity from damaging the electronic components inside the phone. Make sure to wear goggles and be careful not to cut your fingers by glass shards.Tip 2: Simulation TestScreen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means take the phone apart, (motherboard + LCD or screen) connect audio cable and new replacement, power on, test finished. If test OK, please install it. If it can't show, please contact us at the first time. And please don't force it to be installed on the phone. We will not be responsible once the screen is installed. Tip 3: Do not over-bend the cable Please make sure the LCD cable does not over-bend. Bending more than 90 degrees will result in a black screen.