Superfine Green Clay External Use of Cattier extracted in France, in environments protected from any contamination, has been chosen for its incomparable quality. Its properties have been improved by the action of the sun. Clay is used for masks, poultices, and clay water. Indicated as an absorbent, purifying and regenerating mask, Cattier Ultra-ventilated Green Clay is especially suitable for the care of combination and oily skin. Absorbs and regulates excess sebum, removes toxins and impurities, revitalizes the skin and stimulates cell renewal. It also has antiseptic and softening properties. It is recommended for the preparation of clay paste: pour the desired amount of green clay into a glass or wooden container. Add a volume of spring water to fully submerge the clay. Let stand for about half an hour, then stir with a non-metallic spatula to make a smooth paste. Surfine Green Clay is used alone or in combination with essential oils. In beauty mask: apply the clay paste in a thick layer on the face and neck avoiding the contour of the eyes and lips. Leave it on for about 10 minutes without letting the mask dry on the skin. Rinse with warm water and pat dry. Complete the treatment by applying a moisturizer adapted to your skin type. In poultice: Place the clay paste on a natural textile. Roll out the clay with a non-metallic spatula to a thickness of 2 to 3 cm. Place the poultice, leaving the clay in direct contact with the skin and holding it (without pressing too hard) with a bandage. If the poultice is applied to an irritated area, insert a light gauze pad between the clay and the skin. Leave the poultice for an hour. To remove it, remove a maximum of clay, if necessary by moistening it, then rinse the skin with warm water and pat dry. In clay water: pour one or two teaspoons of green clay into a glass and add spring water. Mix with a non-metallic spatula. Wait for the clay to settle back to the bottom and use only the clay water. If the poultice is applied to an irritated area, insert a light gauze pad between the clay and the skin. Leave the poultice for an hour. To remove it, remove a maximum of clay, if necessary by moistening it, then rinse the skin with warm water and pat dry. In clay water: pour one or two teaspoons of green clay into a glass and add spring water. Mix with a non-metallic spatula. Wait for the clay to settle back to the bottom and use only the clay water. If the poultice is applied to an irritated area, insert a light gauze pad between the clay and the skin. Leave the poultice for an hour. To remove it, remove a maximum of clay, if necessary by moistening it, then rinse the skin with warm water and pat dry. In clay water: pour one or two teaspoons of green clay into a glass and add spring water. Mix with a non-metallic spatula. Wait for the clay to settle back to the bottom and use only the clay water. Pour one or two teaspoons of green clay into a glass and add spring water. Mix with a non-metallic spatula. Wait for the clay to settle back to the bottom and use only the clay water. Pour one or two teaspoons of green clay into a glass and add spring water. Mix with a non-metallic spatula. Wait for the clay to settle back to the bottom and use only the clay water.