Automatic 12V / 24V Wind Charge Controller Key benefits Simplifies system setup: the controller automatically detects whether the battery is 12 volts or 24 volts and applies the correct charging parameters—no manual configuration required. Protects battery and wind generator: when the battery is fully charged or the generator input voltage is too high, the controller applies an electric brake to the wind generator to prevent overcharge and reduce system stress. It automatically returns to normal operation when input voltage falls to safe levels. Reliable outdoor performance: housed in a waterproof enclosure with IP67 protection, the controller is built to operate in wet and dusty environments. Easy system monitoring: three LED indicators provide clear, at-a-glance status of charging and protection conditions. Functions and compatibility Automatic voltage detection and charging: detects 12V or 24V battery banks and uses appropriate charging parameters. Generator braking and recovery: actively brakes the wind generator when required and automatically recovers when conditions normalize. Status indication: three LEDs indicate charging, full/protection state, and fault/other conditions for quick diagnostics. Compatibility: designed for use with small wind generators and 12V or 24V battery systems. Important attributes Function: automatic charge control, overvoltage protection, generator braking, and automatic recovery. Compatibility: 12V and 24V battery systems; suitable for small wind generator setups. Protection rating: IP67 waterproof body for reliable outdoor deployment. User interface: three LED indicators for straightforward status feedback. Practical use scenarios Off-grid cabin or tiny home: Integrate with a small wind turbine and a 12V/24V battery bank to maintain safe charging without constant monitoring. The controller prevents overcharging and protects the generator during high-wind periods. Marine and RV installations: Use on boats or RVs with on-board wind generators to automatically manage charging and protect batteries from overvoltage in changing conditions, with IP67 protection for wet environments. Remote sensors or telecom sites: Provide autonomous charge regulation for remote battery banks powered by small wind turbines, reducing maintenance trips through automatic braking and clear LED status indicators. What you’ll get Automatic selection of 12V or 24V charging mode Active braking to protect generator and battery when battery is full or input voltage is too high Automatic recovery when input voltage drops to safe levels Three LED indicators for immediate status feedback IP67-rated waterproof housing for outdoor use This controller is a straightforward, reliable component for small wind-plus-battery systems that need automatic voltage detection, active protection, simple status indication, and durable weather resistance.