Motor Vehicle Sensors Note: Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order. SPECIFICATION : Replace For Part Number: 52933-2M650; 52933-A5100; 52933-2J100; 52933-2M600; 52933-3N100 Battery Life: ABOUT 3YEAR Operating Frequency: 433MHz PACKAGE CONTENT : NORMAL PACKET Application For Genesis G80(from 2017-09 to 2020-00) For Hyundai Accent [HC](from 2017-04 to 2023-03) For Hyundai Accent [RB](from 2011-03 to 2017-03) For Hyundai Equus [VI](from 2009-07 to 2016-06) For Hyundai Genesis [DH](from 2014-02 to 2020-06) For Hyundai Genesis Coupe [BK](from 2008-09 to 2018-01) For Hyundai I30 [GD](from 2012-01 to 2016-12) For Hyundai Ix20 [JC](from 2010-09 to 2018-06) For Hyundai Ix55 [EN](from 2006-10 to 2016-03) For Hyundai Porter [HR](from 2005-07 to 2027-06) For Hyundai Santa Fe Iii [DM](from 2012-06 to 2018-03) For Hyundai Solaris [HC](from 2017-04 to 2023-03) For Kia Cadenza [VG](from 2011-01 to 2016-07) For Kia Carens IV [RP](from 2013-01 to 2019-01) For Kia Ceed [JD](from 2012-04 to 2018-04) For Kia Ceed [JD](from 2012-05 to 2018-04) For Kia Mohave [HM](from 2008-12 to 2019-02) For Kia Picanto [TA](from 2011-02 to 2016-12) For Kia Sorento II [XM](from 2012-10 to 2014-10) For Kia Sorento III [UM](from 2014-11 to 2021-12) For Kia Venga [YN](from 2009-11 to 2018-06) Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. FAQ Q: Frequently of TPMS sensor A: 433mhz Q: Did they tpms sensor need to make program A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Q: Relearn Procedure A: OBD Relearn