Item Type: Incubator Temperature Controller_x000D_ Material: ABS_x000D_ Power Supply Voltage: AC110-230V_x000D_ Power Supply Frequency: 50/60Hz_x000D_ Temperature Measurement Range: -40-110_x000D_ Temperature Measurement Accuracy: 0.3_x000D_ Humidity Measurement Range: 0%-100%RH_x000D_ Humidity Measurement Accuracy: 3%_x000D_ Output Control: Relay Output_x000D_ Output Power: Mximum 10A_x000D_ Installation Hole Size: Approx. 28 x 70mm/1.1 x 2.8in_x000D_ Setup essential_x000D_ Start value Stop value (The program automatically determines that the working mode is cooling/dehumidifying mode)_x000D_ Heating/cooling mode setting_x000D_ Setting method:_x000D_ Setting (start temperature): long press the 1 button, the start temperature flashes, and set the start temperature value through the 11 key_x000D_ Setting (stop temperature): long press the 1 button to stop the temperature flashing, and set the stop temperature value through the 11 button._x000D_ Heating use case:_x000D_ Control the water heater, stop heating to 70C, start heating again when the temperature drops to 45C, and cycle_x000D_ Step 1: Heating working mode, starting temperature stop temperature_x000D_ Step 2: Long press the 1 button, the start temperature flashes, and set the start temperature to 30 by pressing the 11 button_x000D_ Step 3: Long press the 1 button to stop the temperature flashing, and set the stop temperature to 25 through the 1 button, and the setting is complete! If there is no operation for 10 seconds, it will automatically return to the normal display state. You can also press 22 to exit immediately._x000D_ Humidification/dehumidification mode setting_x000D_ Setting method:_x000D_ Setting (starting humidity): long press the 2 key, the start humidity value flashes, and set the start humidity value through the 22 key._x000D_ Setting (stop humidity): Long press the 2 key to stop the flashing of the humidity value, and set the stop humidity value through the 22 key._x000D_ Humidification example:_x000D_ To humidify the supermarket, control the humidifier to 50% RH to start humidifying, and to stop humidifying when humidified to 80% RH._x000D_ Setting steps:_x000D_ Step 1: Long press the 2 key to start the humidity value flashing, and use the 22 key to set the start humidity value to 50%RH_x000D_ Step 2: Long press the 2 key to stop the humidity value flashing, and set the stop humidity value to 80%RH through the 22 key, and the setting is complete! Press the key for 10 seconds without operation, it will automatically return to the normal display state, or you can press the 11 key to exit immediately._x000D_ Dehumidification example:_x000D_ Workshop control exhaust dehumidification system, humidity 75%RH starts dehumidification, humidity 45%RH stops dehumidification_x000D_ Setting steps:_x000D_ Step 1: Long press the 2 key to start the humidity value flashing, and use the 22 key to set the starting humidity value to 75%RH_x000D_ Step 2: Long press the 2 key to stop the humidity value flashing, and set the stop humidity value to 45%RH by pressing the 22 key, and the setting is complete! Press the key for 10 seconds with