Function: The fastest procedure - car is ready to start right after plugging in Intelligent recognition of the ECU and car Original CarLabImmo tool - you can trust it ' let you down for By-pass - Emergency Start Device OverviewTo use Bypass you just need to connect it to the OBD2 socket in the car. The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in. for By-pass - Emergency Start Device Usage Requirements:Car has to be equipped with mechanical key.Car has to be equipped with original parts. The device work only in case of a lost key.If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use SGW Adapter in order to bypass Security Gateway Module How to use for By-pass - Emergency Start Device: Insert the device into OBD plug(In some models produced from 2017 year, you have to use SGW Adapter), the LED start blinking fast.Turn the ignition ON - the LED start blinking slowly.Start the car.If the LED keeps blinking fast after turning the ignition ON, take the key out, wait and turn the ignition ON again. Sometimes the procedure needs to be repeated again. FI-AT By-pass - Emergency Start Device Emulator only work vehicles equipped with metal key. It ' work with a Smart Remote key Colour:As Shown Material:plastic Note: Due to different product batches, the appearance , which does not affect the use If you are not professional for technology, please don' buy this product Installation guide not included, we strongly recommend you professional installation. Please check as much as possible to make sure the item is what you need. Package Contents: 1 * Bypass Emergency Start 1 * 12+8 Connectors Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.