8-14 Inch Saw Rubber Band Saw Scroll Wheel Rubber Ring Wood Band Woodworking Spare Parts Anti-Skid Anti Noise Woodworking Parts Features: * 8 Inch: Use for Band Saw Wheel diameter 205 mm, recommended bandsaw blade length is 1425 mm. * 9 Inch: Use for Band Saw Wheel diameter 230 mm, recommended band saw blade length is 1570 mm. * 10 Inch: Use for Band Saw Wheel diameter 250 mm, recommended band saw blade length is 1826 mm. * 12 Inch: Use for Band Saw Wheel diameter 315/317 mm, recommended band saw blade length is 2240 mm. * 14 Inch: Use for Band Saw Wheel diameter 350 mm, recommended band saw blade length is 2560 mm. * The rubber band needs to be stretched. After receiving the item, place it in hot water and heat it to expand evenly. * Then mount it securely on the wheel without using adhesive. * To ensure the anti-skid rubber ring fits tightly on the outer edge of the wheel and prevents slippage during operation, the circumference of the rubber ring is intentionally smaller than that of the band saw wheel. Installation method: 1. Remove the original damaged rubber ring. If residue remains on the wheel edge, clean it thoroughly before installation. 2. Soak the new anti-skid rubber ring in warm water for 3-5 minutes to soften it before installation. 3. Begin installation on one side of the wheel by pressing one end of the rubber ring firmly into the groove on the outer edge. Use a flat-blade screwdriver to gradually work the ring into the groove, applying even pressure without excessive force to avoid damage. 4. If needed, apply a small amount of adhesive along the groove on the wheel edge to enhance secure fitting. Specifications: Product Name: Band Saw Rubber Band Material: Rubber Color: Black Size Options: 8 Inch, 9 Inch, 10 Inch, 12 Inch, 14 Inch 8 Inch: 8" x 1/2" x 0.12" (205 x 12.7 x 3mm) (Approx.) 9 Inch: 9" x 1/2" x 0.12" (230 x 12.7 x 3mm) (Approx.) 10 Inch: 10" x 1/2" x 0.12" (250 x 12.7 x 3mm) (Approx.) 12 Inch: 12" x 3/4" x 0.12" (317 x 20 x 3mm) (Approx.) 14 Inch: 14" x 1" x 0.12" (350 x 24.5 x 3mm) (Approx.) Suitable for: Woodworking Band Saw Quantity: 1 Piece Package Included: 1 x Band Saw Rubber Band Note: 1. Conversion: 1cm = 10mm = 0.39inch. 2. The actual color may vary slightly from the images due to monitor brightness or lighting conditions. 3. Please allow slight variation in manual measurements.